LP-093S

LOIP LP-093S - in a closed cup, according to Pensky-Martens method (ASTM D 93, ISO 2719, IP 34, GOST 6356)

These instruments are economical alternative to fully-automatic testers on the one hand, and, on the other hand, they are much more convenient and functional comparing to manual apparatuses. Both of them are equipped with a microprocessor controller, a motorized burner transfer device, a Pt-100 thermo-sensor and provide all the automation of flash point tests, except flash detection.

How do they work:

• Mounting the flash cup filled with a sample onto the heater
• Selecting one of the predetermined test programs
• Firing the flame of the test burner
• Pressing key "Start" to begin the experiment
• During the test, an instrument automatically heats up a sample with a required rate and moves the flame over the cup (or down into the cup, when working with LOIP LP-093S Pensky-Martens analyzer) according to the program sets. Every time before burner moving, the instrument gives a beep to attract an operator's attention. The specimen temperature is continuously measured with Pt-100 probe and showed on a display
• The flash moment is determined visually; as this takes place, operator presses the key "Stop". Once the key "Stop" is pressed the heating is finished and the flash temperature is showed on display

Features and benefits:

• Large 4-rows display to indicate all the necessary data at a glance
• Hard-wearing gas valves provide easy flame adjustment and allow portable gas cylinder connection
• Glass-shelled Pt-100 thermo-sensor emulates response of ASTM glass thermometer
• Required heating rate can by easily set and precisely supported by microprocessor controlled heating system
• Up to 20 different testing programs can be saved in permanent memory
• The instrument comes with several preset programs, including the mode for quick approximate flash point determination

Automation

• Heating with required rate (2 segments with different ramps are possible)
• Burner transfer as a standard prescribes

Measuring Programs:

1. 2 standard test method (ASTM D 93 methods A and B)
2. accelerated test
3. quick search program
4. up to 16 user customized test protocols

Specifications: